Description
The particulate respirator of choice. HUMMINGBIRD KF94 Masks are categorized as filtering respirators. They contain filters that protect against 99% of particles while being used in the general environment – at home, at work, and at school.
FDA registered as a respirator, KF94 & CE Certified, our non-woven HUMMINGBIRD 3D Respirator has been tested with sodium chloride and paraffin oil to guarantee its effectiveness. Shaped in flat form, with a curved profile for eyewear and a soft inner shell HUMMINGBIRD 3D Respirators are safe and comfortable for daily use and are available in black color.
HUMMINGBIRD 3D Respirator is certified for KF94 (Korea), CE FFP2 (Europe) and is registered as an FDA Class II Respirator(US).
Manufacturer warning
keep the mask in the original container. Store at room temperature (5-50 °C, 33-86 °F) with a maximum relative humidity of 60%
- Ensure correct fit and proper seal
- replace mask when unable to maintain proper seal
- do not use in an area under 18% of oxygen level
- do not wear mask if the inner wall is polluted
- intended for single use, filtering half mask to protect against COVID019; do not wash for reuse
- consult with your doctor if you have asthma or you are pregnant before wearing the mask
- do not use any material to cover the mask as it may impede proper airflow
- warning – this product is not flame resistant and must not be used in areas with open flames
- This product shall not be used for more than one shift
- this filtering half mask is manufactured for covid-19 protection only. As requested by world health organization recommendations, for this specific use, the nominal protection factor given by this filtering half mask is the same than the ffp2 nominal protection factor defined in en 149:2001+a1:2009. This filtering half mask is not a filtering half mask for general use and shall not be used for purposes other than protection against covid-19.
- leakage may happen if facial hair passes under the face seal
12.do not use in hazardous or explosive area
- This model is certified by CCQS Certification Services Limited., Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin 15, D15 AKK1, Ireland, Notified Body: 2834
- use within 3 years from manufacturing date
How to wear mask:
- Spread apart the top and the bottom layers of mask
- While holding down both ends, place the top layer of the mask on your upper nose area and place the bottom layer by your chin line
- Bend the nose adjuster to fit snugly around the bridge of your nose
- Place both hands vertically over the mask and press in towards your face to make sure a seal has been made. See image below
Reviews
There are no reviews yet.